Provozní metoda kolíkového typu detektoru vlhkosti dřeva
1. Gear setting method: first press the gear setting key (SPECIES), then press the test key (TEST), the current gear value is displayed at this time, press the setting key continuously, you can continuously change the gear until you need it. 's gear.
2. Check before measurement: Set to 5th gear according to the above method, then remove the cap of the instrument, touch the probe on the instrument to the two contacts on the cap, press the test key, if the display is 18±1, it means The instrument is normal.
3 Stanovení: Vložte sondu na přístroji do vzorku dřeva, který má být stanoven. Stiskněte testovací tlačítko, hodnota zobrazená přístrojem je průměrná absolutní vlhkost testovaného kusu. Když je obsah vlhkosti testovacího kusu nižší než 3, zobrazí se 3.0.
